-
When using a cheap AliExpress relay switch I can switch it on and off by using an 'Lightning 4, PT2262, On/Off' virtual switch type. But the status stays at 'On'. Domoticz does shows its switching it …
-
My rfcxcom transceiver is connected on COM3.
How can I submit debug info to analyze why it's not being detected?
It works fine with rfxmgr.
I cannot add the RFXtrx433E trasneiver thing manually bec…
-
When pressing a button on a Lightwave RF Remote (LW100) an error occurs
```
2016-09-29 22:50:54.059 [DEBUG] [g.rfxcom.handler.RFXComBridgeHandler] - Message received: Raw data = 0A140028F36F841001008…
-
I bought some cheap [contact](https://github.com/openhab/openhab/blob/master/bundles/binding/org.openhab.binding.rfxcom/src/main/java/org/openhab/binding/rfxcom/internal/messages/RFXComLighting4Messag…
-
Hardware: Arduino Nano
Firmware: V 3.2.0-b3 SIGNALduino - compiled at Nov 13 2015 21:39:55
RF device: ehemaliger FHEMduino
Auszug Logfile:
2015.11.25 20:32:59.959 5: SIGNALduino/RAW READ: /MS;P0=-3…
-
Todos for r3.2
- [x] Improved whitelist
- [x] Support start and end marker for MU protocols
- [ ] ~~Dynamic logical modules~~
- [x] OSV3 support
- [x] Better message handling, when performing get acti…
-
Hi Max, something has happened. I've just installed a new installation of Node-Red (v0.11.2) on a Pi2 using Node v0.10.40
I've installed NR using the recommended -g and created a new flow. I installe…
-
Two Chuango door/window (reed) sensors I have appear, when they trigger, to show up in rtr_433 as
ID 16bit = 0xFC5C
CMD 8bit = 0xC7
instead of the proper
ID 16bit = 0xFC5CC
CMD 8bit = 0x7
and
ID 16bit…
-
Das Senden des PT2262 Codes klappt bei meinem LP801b Empfägern nicht.
Ausschalt Signal über FHEM -> Fhemduino gesendet:
Sync: -5864 -> SyncFact: -28.75, Clock: 204, Tol: 102, PattLen: 2 , Pulse: 176…
-
Fernbedieung mit LP801B (ist wie PT2262):
Ausgabe mit Debug Detect:
D sync: 188, -5804, TOL: 94, sFACT: -30.87
Sync: -5804 -> SyncFact: -30.87, Clock: 188, Tol: 94, PattLen: 1 , Pulse: 572, -180
MSG…