-
Now the user has to select one trace and export (either menu or right-mouse button).
Feature:
- [ ] select one or more traces for export
- [ ] select diagram, menu or RMB to export all traces
…
-
INFO: Starting global optimizer on 'ubuntu'...
auxfunc_measurefromlis.c - ProcessOutputFile -- Cannot open output file: ubuntu.dat
hello
... I'm not an experienced linux user
installed .AppIma…
-
Not getting any qDebug() messages on the console.
`./configure --disable-doc --enable-maintainer-mode`
Don't know if `--enable-maintainer-mode` matters or not here; gave it a shot.
Compilatio…
-
When enabling accesibility, use of global keyboard shortcuts,
start listening, text to active window doesn't paste the text.
It starts listening, then when it stops the spoken text doesn't appear …
-
When calculating the impedance of a rectangular waveguide filled with a dielectric (Er > 1) the result is wrong. It looks like a factor of sqrt(Er) was forgotten in the equation:
Example: given a re…
-
In an AC simulation, the voltage probe appears to simply calculate the difference in total noise voltage between its terminals, which generally does not provide the correct result.
As a simple demo…
-
I ran into an issue testing an old Qucs-S project that was previously converted from Qucs. First issue was the 4-pin Blue BJTs were removed from Qucs-S. I then converted to 3-pin Blue but then the "ol…
-
These are used to relocate or override the executables.
Some are setup during the Windows install.
Document them somewhere accessible (wiki, `qucs` CLI, ...)
These are the ones we have:
```
./main…
-
EDIT: loss formulas for CPW at see http://qucs.sourceforge.net/tech/node86.html use different units - this is confusing
In the cpwline.cpp it looks like the conductive losses are calculated as if t…
-
The issue here is what specification and design for the 144MHz bandpass filter. The aim is to use the same filter for tx and rx with PIN diode switching.
Specification has been taken from https://…
G4CDF updated
2 years ago