-
I trying Quectel EC25 and ESP32-S3 with USB connection.
I have a successful PPP connection within the 4g_hotspot example with the config shown below.
CONFIG_BRIDGE_MODEM_USB_VID=0x2C7C
CONFIG_BRI…
-
反馈bug/问题模板,提建议请删除
## 1.关于你要提交的问题
Q:是否搜索了issue (使用 "x" 选择)
* [x] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
A:编译带luci-app-pcimodem会报错,大概知道这个问题在quectel_MHI驱动上
### (2) 路由器型号和固件版本
A:x86,6.1
…
-
Hi,
Great work you have done so far. I also wanted to try to create a gateway myself then I stumbled on your project. I have gone through the LoRaGW userspace C code and currently they use the Ublo…
-
Hi everyone,
I am having this issue when I run scat in debug mode with my SIMCOM8200
```
2023-12-22 18:45:56,785 scat.qualcommparser (parse_lte_mac_rach_response) WARNING: Unexpected MAC RACH Res…
-
Regardless of what we do to solve location issues we need to get an AT command loop to work
-
I'm getting the following warning when uploading a tracklog from my SkyDrop to xcontest.org
![image](https://github.com/fhorinek/SkyDrop/assets/2964543/5b2a8e9c-a5cb-4126-81f3-dfc2581ef239)
The …
-
I am currently experiencing `IndexError: list index out of range` in [GPS.py](https://github.com/sixfab/Sixfab_RPi_3G-4G-LTE_Base_HAT/blob/master/script/GPS.py) for Quectel Module: Quectel EG25-G.
…
-
I noticed the following when trying out `atat`. When defining ATI response using `heapless::Bytes` it parses correctly.
```rust
#[derive(Debug, Clone, AtatResp)]
pub struct ATIResponse
{
pu…
-
https://yancoding.github.io/posts/3c0ad28a2fa4/?highlight=ec20
EC20模块 查看连接状态执行lsusb Bus 001 Device 004: ID 1357:1000 P&E Microcomputer SystemsBus 001 Device 005: ID 2c7c:0125 Quectel Wireless Solu…
-
头盔系统版本:2.0.2-20210716-502102
5G固件版本:RM500QGLABR11A04M4G
使用如下命令对头盔进行配置后,接入5G网络失败,头盔不发起建立PDU会话建立流程
crown:/ # quectel_modular_config_demo
> AT+QNWPREFCFG="mode_pref",NR5G
OK
> AT+QCFG="ims",2
OK