-
Hello,
i'm recording a bunch of pulses and re-playing them quite similar to the example http://abyz.me.uk/rpi/pigpio/python.html#wave_add_generic
my application records the remote control's signal…
-
I think it could be a good idea to disable the upload feature, button and drag and drop, when the printer is printing. if several files are uploaded during a print, probably the pi will not be able to…
-
Bonjour, est-il possible d'ajouter cet équipement à Abeille ? Il s'agit d'un compteur d'énergie double pince ampèremétrique. L'équipement est détecté en Unknown device et seules les commandes de base …
-
Hi,
I have a weird problem and Github issues might not be the correct place to write this. Please forgive me and let me know where to write it in that case.
The problem:
I have a working NUT …
-
When installed via Octoprint the following message appears
"Plugin management log
Install Unknown: "
But the installation shows completed.
The plugin never appears.
The install log displa…
-
Hello,
I've been using PINN since years now and its a really great solution, always improved in a very good way. I never had any problem during installation nor update until today.
On a fully fu…
-
## Basic information
- Board URL (official): http://www.orangepi.org/html/hardWare/co…
-
Not sure if this is perfect but it worked for me.
After hours and hours of trying to get it going on my Pi 4 I finally did.
Not wanting to break it I thought I would try on a fresh image of Raspbian…
-
Using "Linux raspberrypi 5.15.32-v8+ #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022 aarch64 GNU/Linux"
OS: Pi OS Bullseye Release 11.
I am using CM4 ioboard carrier board with 4GB RAM and 32GB e…
-
Trying to use a bluetooth mic/speaker in a raspberry pi 3 (headless).
Hardware is Raspberry pi 3, firmware updated today, running raspbian also dist-upgraded today. Using bluez and pulseaudio (syst…