-
Attach the OP-TEE OS image as [FIP](https://trustedfirmware-a.readthedocs.io/en/latest/getting_started/image-terminology.html#firmware-image-package-fip) to [BL31](https://trustedfirmware-a.readthedoc…
-
Made candle work on raspberry pi 4 with 32 bit Raspbian
but the manual movement as well as the steps taken are too slow.
This means the mill is waiting for every step about 1 complete second.
…
-
It's possible.
@Algernon-01 managed to implement it in @Whonix which is using grml-debootstrap. (https://github.com/Whonix/Whonix/pull/419)
In essence if I did not overlook something - deduction f…
-
In lesson 1, any specific reason of not using C to implement put32 and get32 in utils.
Please clarify if its just a choice or any specific reason.
-
https://wiki.osdev.org/Raspberry_Pi_Bare_Bones
Explica como arrancar desde 0 en una raspberry pi.
-
Hello, I am green in utilizing this project. I ran a git clone of the project in powershell. I opened it up in vs 2017 rc to attempt to compile it.
The point of utilizing this is to basically se…
-
Thanks for doing this. I had to make some adjustments to get the native emulation to work on Arch Linux.
For Arch, packages `qemu` and `qemu-arch-extra` are required.
After unzipping the Raspbi…
-
I'm mostly opening this issue for note tracking.
A known working point is doing `cargo run -- build-image --target=arm-rpi3 --device-type sd-card --out foo.img --release` in the standalone-builder,…
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…
-
wlan0 no longer available after running this unfortunately. Having trouble getting wifi working again with my Pi 3 :(