-
- Comma 3 0.9.7-release Dongle 49734429dda9bbe7
- 2x mileage issue began approximately 7/14/24
- Secondary issue of incorrect starting location began approximately 7/16/24
- Both issues continue today…
-
```
What steps will reproduce the problem?
1. I think that I bougth a dead NAS.
2.
3.
What is the expected output? What do you see instead?
Nothing happens. LED Link SYS, USB1 and USB2 half bright.
…
-
I'm going crazy with that problem!
When boards nand is erased, and you insert the recovery sd from btm website then the miner will start, but the mtd is not avail and for that the upgrade with the we…
-
### Describe the bug
Calib arm flag not cleared when reflashing from configurator - no output observed from gyro
### To Reproduce
Reflash 4.4.0+ from configurator
Load custom defaults for …
-
Thanks for the thorough write up!
I'd like to add some data points and see if there's any more guidance on the software only method.
**System Info:**
- Z620
- E5-2650 v1
- 12/28/2011 Boot Bloc…
-
Hi,
I am trying to reflash, using the ST-Link V2.
However, I get the following error:
openocd -f interface/stlink.cfg -f target/gd32e23x.cfg -c init -c "reset halt" -c "flash read_bank 0 ZY-M100_L.…
-
Hello,
I plan on buying a Libra H20 but I'd like to be able to reflash it with custom firmwares.
Could you provide instructions on how to backup and restore the original firmware so that everything …
-
```
What steps will reproduce the problem?
1. I think that I bougth a dead NAS.
2.
3.
What is the expected output? What do you see instead?
Nothing happens. LED Link SYS, USB1 and USB2 half bright.
…
-
While working with the serial emulation, I noticed that `LINPUT#` will only ever return a single character, and doesn't buffer them. Characters are missing regardless of baud rate. The real RS-232 Hex…
-
You said M40->M6000 most likely requires reflashing, and then link a post that didn't reflash vBIOS. I currently have a Tesla P10, which seems to be a TDP restricted version of P40, so I'd like to see…