-
Add this special RJ12 RS232 to USB cable which is specific to the Renogy Rover to the Amazon parts list.
[https://www.amazon.com/Charger-Controller-Converter-Adapter-Chipset/dp/B07JGRJR4V/ref=sr_1_…
-
I'm having trouble getting the rngBridge to power up. My Renogy charge controller is pushing out 14.5V on the correct pins. With the buck converter plugged in, I don't see any activity on the rngBri…
-
Hey Cyril,
Thanks for writing this software, it works great.
I am trying to use a converter/cable to go directly from the Rover RS232 port to computer, without using the Bluetooth module. Have …
-
running HOAS on Raspi Pi 4B
with
Core 2023.12.4
Supervisor 2023.12.0
Operating System 11.2
Frontend 20231208.2
Trying to add this Repository from Store with https://github.com/durib/ha-renogy-…
-
Read charge/discharge limits from the BMS settings instead of using a hard coded value.
This command is not in the LTT protocol document, but the app does set these so it should be possible to read.
…
-
### Describe the problem
Hallo Zusammen,
Ich habe folgende Umgebung:
Raspi4 mit VenusOS Verion v3.30
2x Seplos Batteriepacks BMS Seplos BMS V16 (10E) Software Version: 16.6
venus-os_dbus-seri…
-
Hi,
Is this something related to the integration or a general limitation that the BT-2 can't connect with 2 clients?
Regards,
Didi
-
### Describe the bug
Battery gets disconnected in the OS. It was working fine for months.
As you can see in the logs: the soc value is None and the software terminates.
### How to rep…
-
### Describe the bug
I swapped out the batteries connected to my JKBMS (from 100Ah to 280Ah), but systems 15s. I changed the maximum charge/discharge capavilities, and the total Ah in the BMS direc…
-
### Describe the problem
My system: EasySolar-II GX, 6 x 50 Ah 17s LiFePO4 with JBD (Jiabaida) SP22S003 BMS. BMS communication is BMS UART Isolation module ADUM1201 Generic USB to TTL module USB…