-
I have a delta printer that has DELTA_DIAGONAL_ROD of 470 mm and I'm using 400 step/rev steppers. Delta calculations overflow if I set microstepping to 16. I'm using filament drive with 18 mm pulley.
…
extin updated
10 years ago
-
- Capture du modèle utilisé pour réaliser ce test. L'angle est mesuré par rapport à la verticale.
![2014-12-18 16_35_21-slic3r_testanglesupport skp - sketchup make](https://cloud.githubusercontent.c…
-
I like the GUI, but have tweaked my Slic3r settings a lot to get them where I like them. I wouldn't use any software unless it offered me the same configuration options. Even an option to use one of t…
-
AZSMZ LCD + repetier 1.0.3 + Arduino Due + SMARTRAMPS -> now card is readable but is displaying only random noise.
Card was unreadable till this last fork, now serial monitor says card mounted (Card…
-
hi
when i export it works fine and i get a Gcode file that looks fine (test.g) but then when i load it in either Repetier Host or Pronterface i get nothing
it loads the Gcode fine but lists the …
-
## Details:
- Repetier-Host-Mac 0.40
- Marlin firmware on printer, endstops active during print
- my manual end-gcode appended by slic3r to the print file:
G90 ; absolute coordinates
G0 X0 Y…
-
Testing OpenDact Version 3.0.0 (Abbout Button is promting this Version) I downloaded it from the seemecnc Page as 3.1.0A
I use the newest Repetier Firmware. Connecting works but thats it. Is there so…
-
Hi,
Very much loving the new webinterface (ditched pronterface & repetier).
One small detail: webinterface doesn't update the layer statistics graph as you can see in the screenshot.
Working in Fire…
-
Documents for PCB assembly are needed:
- [x] DXF simplified drawing of PCB components, front/back
- [x] component type/value list
- [ ] recommend assembly order
- [ ] PCB reflow thermal profile
…
-