-
The value for the MAX31865 Reference Resistor is not noted as far as I can see, this is a needed value for configuration. Is it the standard 430 resistor or something else?
-
I flashed the latest release onto ali rp2040s and the 5 way switch and trackpoint do not work. The left hand side does not work when connected by TRS but works on its own connection except for 1 colum…
-
Right now if I wanna filter for resistors for example, I must enter `50000`, I would like to be able to write `50k`... and also would like to support the somewhat common writing style of `5k1` for val…
-
![image](https://github.com/user-attachments/assets/b3f721dc-d02d-434d-80d7-01ca844b77b5)
```tsx
export const BlinkingLed = () => (
…
-
I'm trying to make my 3D resistor models generator with PcbDraw components, I'm using the following test case:
[resistor_tht.zip](https://github.com/yaqwsx/PcbDraw/files/11020982/resistor_tht.zip)
…
-
![image](https://user-images.githubusercontent.com/12049360/52522824-cd1f4b80-2c8a-11e9-8db7-2f6f94c8edda.png)
![image](https://user-images.githubusercontent.com/12049360/52522831-d7414a00-2c8a-11e9-…
-
LEDs are currently insanely bright, tested with different versions (5mm VS 3mm), so test again and find better value to not go blind.
MrAJB updated
3 years ago
-
Hi,
I am trying out your Arduino sketch and I got it working mostly, but some of my output is garbled. I was wondering which type of resistor you were using.
Could you also post the scheme? So I hav…
-
The debounce resistors have too high a resistance (27k), which means that they cannot successfully overcome the pull-up resistors inside the ESP (10k). For example: Pressing the rotary encoder button …
-