-
I am trying to generate my own RF signal, because I have been unable to capture RF packets with the broadlink device. I have been able to use https://github.com/1technophile/OpenMQTTGateway
to captu…
-
I did some measurement work on Silpa and its RF signal path and here are the results.
## AM/AM measurements
Measurements were performed using a signal generator and a spectrum analyzer. A continuo…
-
I would like to start this issue mainly to see interest for the support in robotframework community.
Ever since RoboCon 2021 GraalVM Python was on our radar as potential replacement for Jython. See…
-
We have determined that there is strong coupling between single pulse TMS (with a biphasic pulse of 250 usec duration) and a receive-only RF coil when the RF coil is receiving signal, i.e. there is a …
-
### NodeBB version
v3.8.2
### NodeBB git hash
_No response_
### NodeJS version
_No response_
### Installed NodeBB plugins
_No response_
### Database type
_No response_
### Database version
…
-
HDSDR shows the RF level in dBFS - assuming, that the I/Q samples it receives are really the sampled values.
strong signals, might get filtered out with the DDC step before HDSDR gets the I/Q data an…
-
Hi everyone,
I'm really interested in building this project, but I don’t have much knowledge about electronics/RF, so choosing alternative parts has been confusing, especially since some ICs aren’t…
-
Hello,
I set up this cc1101 module
https://www.wantitall.co.za/electronics/solu-cc1101-wireless-transceiver-module-with-spring-antenna-for-arduino-wireless-rf-transceiver-315-__b00xdl9e64
An…
-
Hello,
i am trying your code with a COOLSEER WIFI IR+RF CONTROLLER BLACK (also CMT BASED) and i have trouble forming the PWM Packet.
You can see the original packet here:
https://triq.org/pdv/#AAB…
-
Thanks for the excellent work, could you please release the code for transforming the raw radar signal to RF images?