-
From the documentation https://docs.m5stack.com/en/core/M5Dial
The Dial uses the WS1850S rfid chip, the same as the RFID2 Unit
https://docs.m5stack.com/en/unit/rfid2
I have no problem reading NFC51…
-
Run Mopidy install guide
wget -q -O - https://apt.mopidy.com/mopidy.gpg | sudo apt-key add -
sudo wget -q -O /etc/apt/sources.list.d/mopidy.list https://apt.mopidy.com/stretch.list
sudo apt-get upd…
-
```
Hi everybody, i'm trying to write my card but i can't i have the same error.
This fail only occur with an specific tag with some other tags had been wrote
succesfully .
Im'm using libnfc 1.7 in d…
-
```
A checksum is read from the RFID card can be used to verify the card is read
correctly. This Checksum byte should be written to the CSV file along with the
card ID to aid validating the records…
-
```
A checksum is read from the RFID card can be used to verify the card is read
correctly. This Checksum byte should be written to the CSV file along with the
card ID to aid validating the records…
-
```
A checksum is read from the RFID card can be used to verify the card is read
correctly. This Checksum byte should be written to the CSV file along with the
card ID to aid validating the records…
-
### Version
3.5.2
### Branch
future/main
### OS
RPI OS bookworm lite - 32bit
### Pi model
3 B+
### Hardware
- [Suptronics x400](http://www.suptronics.com/xseries/x400.html) Soundcard
- [MFRC…
-
Hello,
i have some problems with HID API aplication. I just want to READ RFID data from card with my RFID reader pluged in USB port. I changed the VID and PID of the device in handle field, but its n…
-
Previously we were using PN532 NFC Module.
This module works using I2C (and SPI as well), and worked fine, but for new desing we would like to test another board (Cheaper and smaller)
The Board to…
-
```
Hi everybody, i'm trying to write my card but i can't i have the same error.
This fail only occur with an specific tag with some other tags had been wrote
succesfully .
Im'm using libnfc 1.7 in d…