-
There is another MQTT-Gateway project under active development.
https://github.com/1technophile/OpenMQTTGateway
I believe that both projects address the same idea.
They both developed in differ…
-
I try to list here hardware which could be used for tests, proof of concept, etc.
DIY-Tracker: http://wiki.glidernet.org/ogn-tracker-diy
- 32-bit CPU: STM32F103
- RFM69 or RFM95 RF chip
- almost…
-
- Arduino board: Feather M0 RFM69
- Arduino IDE version: 1.8.5
- Library version: 1.0.2
Issue:
Each measurement is made separately. In fast changing voltage and current situations, the readin…
-
Hey, I've been trying to run the software on ESP32 over the Arduino IDE.
Someone's written a RFM69 Library compatible with it: https://github.com/rrobinet/RFM69X_Library
Upon trying to just rep…
-
**What new integration would you wish to have?**
Froggit/Ambient Weather F007TH Wireless Thermo-Hygrometer to remote receiver
**If possible, provide a link to an existing library for the integ…
-
##### End Goal
Using DTLS for LoRa data. Why? Because I'm using the RFM95 (sx1276) module that doesn't appear to have encryption, and the RFM69 (sx1231)modules (that do have encryption) are using AE…
-
Hello,
i use the code with WEMOS D1 mini.
I get this output on com port:
Do you have any idea?
A second gateway with the same hardware had the same mistake. But now it works and i don't know…
-
I've been trying to send data from an RPi with RFM69HW attached (433MHz), but no matter what I try it seems that the two devices don't see each other. Are qbcans only able to communicate with other qb…
-
Hi
I have problems with stable transmissions for the RFM69. Initialization seems to be fine, but when I transmit with `_spRFM->send(_spData, 2)` sometimes the call will never come back. It looks like…
-
I am using Adafruit Feather M0 with LoRa module which has 915E6 frequency. I tried to work with provided solutions here but could not get any way to start my LoRa system
My module is: https://learn.a…