-
# Knowledge
1. See #4
2. Run [Python coordinate converter example](https://github.com/coloradocube/balloonsat/blob/main/gps/python/RaspberryPi/coordinate_converter/main.py).
3. Read & run [Python…
-
I'm using rpi 3b+ with venus os 3.2 large install, have gui_mods and RpiGpioSetup installed and configured for this relay hat:
https://www.waveshare.com/wiki/RPi_Relay_Board
(waveshare with 3 relays…
-
I have a Raspberry Pi 3b and had this device up and running. Then one day it stopped working. I assumed it was a hardware failure so I returned it and got a replacement. Replacement arrives and it s…
-
Raspberry Pi Zero 2 W
(2) 16x32 Adafruit Matrix Panels
Adafruit RGB Matrix Bonnet
Raspbian Bullseye 32bit Lite
Everything installed, no errors.
Example:
`sudo ./text-scroller -f ../fonts/9…
-
Hi! Thanks for your work.
Can you give some instruction to launch this project.
First problem: I have same extension shield (HAT for steppers) for RPI. How to make it works?
Best wishes,
Alex
-
Will support for CaribouLite SDR be added in the future? It's similar with the Pluto but it's cheaper and is designed as a RPi hat, good option for QO-100.
Thank you,
Razvan (M0HZH)
-
Hello everyone,
I've got a HUB75E on a pi zero W.
I did the trick to avoid flickering (soldering on the bonnet) but even if the main flickerings have gone, there are some very annoying (black bars…
-
Hi,
Playing audio on the RPI from my computer works well over Bluetooth, but I have not been able to play audio locally on the RPI after the installation. For instance there is no audio when starting…
-
# Library Repackaging Progress
This is an overview of our Python going concerns. Not all of these may need repackaging or be possible to repackage, and some of them might work with Pi 5 / Bookworm …
-
I order to only have _one_ cable going to our RPi iOT devices I would _love_ to use Power Over Ethernet:
https://www.raspberrypi.org/products/poe-hat
![image](https://user-images.githubusercontent.c…