-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…
-
For the last 3 years, I've been running MotioneyeOS (from June 6, 2020) in a Raspberry Pi Zero W with a RPi camera module attached via the CSI camera connector.
motionEye Version 0.42.1
Motion Versi…
-
Hi, first of all, amazing piece of work/software you got here! Cheers!
Now, I have put this into a rasp pi zero 2w and connected to a Argo Trekking (Fiat) 2020.
And did not work first, After som…
-
Hi,
ich versuche gerade den Controller auf einem "Raspberry Pi Zero W" zum Laufen zu bringen, habe jedoch Probleme - da der Chromium Browser in den aktuellen Rasbian Images beim Zero W nicht mehr sta…
-
Hi,
Support has been added to Adafruit-Blinka for the Banana Pi M2 Zero and Orange Pi Zero Plus2-H5, now added to gpio3_relay.py so that the system can be ported to these boards if desired. The Ban…
-
Hello! My order arrived today, and it was very fast considering the situation. I tried using that solution (sudo hwclock -s and the config txt including dtoverlay=i2c-rtc,ds1339) for making the time r…
-
Create our own custom Raspberry Pi image that can be flashed to a Micro-SD Card to boot up a Raspberry Pi Zero 2 W.
https://github.com/RPi-Distro/pi-gen as a refference.
-
As noted in issue #27, the native builds for ARMv6 (_Pi Zeros and all Generation 1 models_) are not working.
**The 32-bit binaries compiled are not ARMv6 compatible.**
This issue affects the f…
-
Hi,
Is there any chance that there'll be an nexmon update for the 5.10.3+ kernel? (RPi Zero W)
-
When I setup connection via USB->Rpi 4 it can disconnect random midprint. But when I use UART, everything is working ok. I have tried different usb cables, does not help. It also disconnects until I p…