-
### Describe the problem
```
➜ blink arduino-cli compile --fqbn arduino:avr:mega
Used platform Version Path
arduino:avr 1.8.6 /home/trify/.arduino15/packages/arduino/hardware/avr/1.8.6
E…
-
## Platform
I’m using:
* [ ] gokrazy/rpi3b
* [x] gokrazy/rpi3b+
* [ ] gokrazy/rpi4b
* [ ] gokrazy/apu2c4
* [ ] gokrazy/x86-64
## Observed behavior
No documentation how to set sysctl.
…
-
I tried it on TFT 5" LCD with resistive touch attached on Raspberry Pi 3 B+ working on Raspberry Pi OS bullseye and it works.
But for the latest version of Pi OS "Bookworm" it is not working. The LC…
-
Hiya.
It seems it is running and recognised by cp-plus but not reacting to the commands sent. On RPi4B, tried several uarts.
"mosquitto_sub -t service/truma/cp_plus_status" shows "waiting", after f…
-
### What happened?
What happened:
```
[🐳|🔨] cp: cannot stat '/usr/lib/linux-image-6.1.93-legacy-bcm2711//broadcom/*.dtb': No such file or directory
[🐳|💥] Error 1 occurred in main shell [ at /a…
-
Hello, i have create the source succesfully with sh install-driver.sh
If i plug in the device the module load but it not start the device and i didn't became a interface name.
My device:
EDUP EP-…
-
I am a newbie in SW and been having trouble getting this up. I am running "docker compose up" but end up with the following error message -
_> [baby-sleep-coach 6/8] RUN pip3 install -r requiremen…
-
I'm trying to get this code running on my RPi4B and I can't seem to get it working. I've changed PERIPHERAL_BASE to 0xFE000000 as documented [here](https://www.raspberrypi.org/forums/viewtopic.php?t=2…
-
I am using Raspberry Pi Pico W with openocd-dirtyjtag and trying to flash/debug NXP LPC1837. Got the following error when I try to start openocd. Please help me in resolving it.
```
iotdev@iotdev:…
-
NOTE: Turns out the "system.journal corrupted or uncleanly shut down" appears
to be the "unknown time at boot" problem, where the system.journal file appears
to have future timestamps in its informa…