-
```
What steps will reproduce the problem?
1.insert usb-to-rs232 converter to freerunner
2.type "dmesg"
3.don't show ..........
........... /dev/ttyUSB0
it means not support …
-
Hello @PierreRust,
Many thanks for your work. Please is it possible to kindly add support for the Serial interface? I went via the doc on the pigpio library, and it seems to support serial.
I ha…
-
```
hi, i'm trying to connect the kk board with rs232 inteface, so i connect tx to
miso, rx to pin 30, gnd to gnd and 5v to usb 5v, i see the com port but the gui
didn't show any data.. what speed i…
-
Hi,
on my Rock 5B I can only see 2 Uarts:
│ ttyS6 console : [On] …
-
I've wired up a cable that plumbs my Geodimeter 4400 Robotic station to both provide power and bi directional RS232 connections.
I'm quite sure I got it right, both data lines are idling around -13…
-
As someone doing computing support, and power supply support, I would like all the danfysiks on muons to use the same communication method. Currently some of them use RS422 and some use RS232, this wa…
-
Input runner data by connected RFID reader
- Device integration
- How do we know IN/OUT?
- Input collision protection
- Error checking
Brandon
- May be a keyboard wedge method, (but must be able to f…
-
Hi
I have mainboard MKS Gen 1.4.
Can i use Connector labeled 5V, GND, RXD2 and TXD2 for BT-Communication with HC-05 Modul?
It seems i only need to change jumpers JL1 and 2 and JP1-4 !?
-
Same requirements, as in #14
-
```
hi, i'm trying to connect the kk board with rs232 inteface, so i connect tx to
miso, rx to pin 30, gnd to gnd and 5v to usb 5v, i see the com port but the gui
didn't show any data.. what speed i…