-
Hello
I running Linux mint 21.3 and Sdrangel on his latest version.
RTLSDR is missing from the device list. But the dongle has been correctly detected with lsusb command.
just for clarify
…
-
I would like to use rtl_power_fftw for frequencies below 24MHz. This requires initializing the rtlsdr with direct sampling enabled. Is there a way to enable direct sampling with rtl-power-fftw?
-
Hello all,
I am currently at an impasse. I need to configure a second WiFi interface (RLT8188eus USB key) in order to be able to connect an external antenna.
I'm working on :
Linux KaliDiver 5.6.0-…
-
Similar to https://github.com/merbanan/rtl_433/issues/2621, `git checkout 22.11` is OK.
`23.11` and `master` are producing the same error.
This process is not operating with network access, if tha…
-
Hello Guillaume,
I come around your code, and was very interest to it because I own a VMC Ideo 325 myself.
I was able to run this code with some modifications on a raspberry, and decode the comm…
-
Hello, as the title says, I have a Nooelec SMArTee v2 dongle based on RTL2832U chipset.
I run the latest Pi image available of r2cloud on a Pi 3B+.
Within the console, I can run rtl_test, rtl_eeprom…
-
**Please Describe the problem to be solved**
When utilizing multiple SDR devices on a pi of the same type, the device ID for each SDR changes if unplugged/plugged in and it seems to change after a re…
-
Hi,
I am currently running an instance of radiosonde_auto_rx on my Raspberry Pi 4 connected to a Nooelec NESDR SMArTee v2 dongle. I've been running it continuously for the past weeks and have been ex…
-
Hi sir,
I tried to install grgsm on mu raspberry pi 2, and firstly I ran "kal -s GSM900 -g 40",i have got the result:
![qq 20170306210823](https://cloud.githubusercontent.com/assets/15179223/2361…
-
When I invoke the application I see flashes of errors that clear away quickly before they can be read and I see text staircasing. In an attempt to calm the output I piped the output into strings so …