-
After b6f418b1fe5af0386c81f387227f36d4801883b0 there was some change that broke the usage of `golang-evdev` on my Raspberry Pi 3B+ running balenaOS. (With resin/scratch containers built with balenalib…
-
Various values including advertising_interval, main_loop_interval, ble_tx_power, oversampling and log interval should be configurable by users. This has been requested many times. The current approach…
-
Hi Evangelos,
We have received the permission from Trackcol to download your firmware for the Ruuvi. I would like to compile it using SES but cannot find the sdk_config.h file.
Not being an expert…
-
Description:
Force claim string is not in language file, probably hard coded
This should be in the language file
You are scanning a different RuuviTag
Related iOS card: https://github.com/ruuvi/co…
-
I'm running the latest master on the latest stable Home Assistant in a Docker container.
I have following configuration:
```yaml
- platform: smart_thermostat
unique_id: ilp_pid_thermostat
n…
-
Description:
User tries to force claim different sensor than the sensor card that he is on.
Actual: Error: Forbidden
Expected: You are scanning a different RuuviTag (same as in Android)
This string…
-
Description:
I have RuuviTag 2-in-1 in Ruuvi Station and for some reason it is showing more than 1 chart.
This should work same way as in Android, where 1 chart is shown for temperature.
![Image](…
-
Hello Thomas,
While portring my ruuvitags from a homey 2016 to my new homey 2023 i run into a problem. When trying to connect the ruuvitags to my homey 2023 i get the same error every time "Cannot …
-
Attempt to claim sensor IO am holding via NFC reports forbidden.
PS NFCtools scans tag immediately, ruuv)i station needs to be convinced (i.e. stroked back and forth
![image](https://github.com/ru…
DG12 updated
2 months ago
-
I believe this is a long time issue causing various problems including rapid batter drain.
When monitoring a sensor at -73 dBM, via BLE advertisments (not logged in) the updated seconds ago flashe…