-
Its posible, to use only one Arduino like Mega2560 as unique arduino, to control four Rx5808? instead one arduino for each RX ?
Thanks
-
I've done project structure rebuild including new HAL peripherial configuration.
@mihero once you confirm it works for You i will merge it to master branch
https://github.com/piodabro/rx5808-pro-…
-
OK guys,
a while ago, i created a 8in1 PCB for the Chorus Tracker. It was my first design and of course the PCB was not 100% correct. There were some GND Pins of the Arduino not connected together …
ps915 updated
6 years ago
-
to enable "best channel" auto-search feature
-
I recently ordered 4 rx5808 modules from Banggood and when they finally arrived and I removed the metal casing, the resistor that you explain how to remove is not installed from the beginning. I solde…
-
Yep that's exactly what i meant on rcgroups.
Feature: **how to edit - LOGO"/Callsign in screensaver mode** !
Very nice job.
Cheers.
-
https://github.com/voroshkov/Chorus-RF-Laptimer/blob/1e01318f48f0c909f864a3713422c2f551f02a34/Arduino/chorus-rf-laptimer/rx5808spi.h#L82
Hi,
this is not an issue but a question about documentation…
-
I have two lap timers and when they connect with the phone, the lap timer with the Stepdown (Timer 1/ Pilot 1) does not give an accurate RSSI level. The second lap timer on the other hand, does work i…
-
I opened the can on one of my new RX5808 V07 20160524 modules to remove the resistor to enable SPI only to find there was no resistor to remove.
I'd just like to confirm this module needs no modific…
-
Hi,
wouldn't it be possible to use one Arduino only. Wire all the spi pins as in the rx5808 diversity, but use different pins for the chip Select pins. So if you have for rx5808, wire chipselect 1 to…