-
I have tried to use this on a Teensy LC, Teensy 3.1 and Teensy 3.2.
using your example arduino ino sketch,
sbus_rx.read() never returns true, regardless which serial hardware identifier i use, r…
-
**Describe the bug**
Coming from OTX 2.3.14, i installed EdgeTX 2.6 with externalaccessmod and RC output disappeared from the receiver.
When the receiver is connected, the channel data sometimes ref…
-
I tested GPS, servo output and baro sensors here on my test board.
The servo values have been explained, but about the baro sensors, I have two questions.
I tested with MS5611, SPL06 and BMP280.…
-
## Current Behavior
Hi, I have an issue with ELRS PWM receivers: BetaFPV ELRS Micro Receiver and Matek ELRS-R24-P6. If I flash them with firmware 3.1.1 EU domain LBT, I got a loop where the conntec…
-
u-blox GPS with M10 chipset do not work anymore with oXs. Eventually this is because NAV-SOL messages are not supported.
From u-blox M10_ROM_5.00_ReleaseNotes_UBX-20050981:
5.2.3 Removed UBX messa…
-
gonic version: master
I am not really sure what is going on, feels like buffer overflow or something similar, but when using transcode with some crazy high bitrate, it tends to stops. the…
cacko updated
11 months ago
-
First, I'm would like to apologise if this is not the right place to ask this question (just close/delete/kill it and I will understand). I've searched through the old issues, but I couldn't find anyt…
-
## Current Behavior
Can not use this feature to use CRSF inverted on SBUS pin
Tested on : Betafpv nano rx and Happymodel EP2
- TX hardware: DIY 2.4 E28 ELRS TX
- RX hardware: Happymode EP2, Be…
-
EDIT: initial issue description is wrong, see here: https://github.com/betaflight/betaflight/issues/3994#issuecomment-325594640
A bit strange issue and i do not have another board to verify.
< 3.0…
-
Instead of CRSF output, generate PWM signals to drive servos.
It would be great to have ExpressLRS drive servos directly for fixed wings that wouldn't have a flight controller. The developers have …