-
https://github.com/raspberrypi/linux/issues/3010#issuecomment-1012920785
ex:
```
cd /lib/firmware
sudo ln -sf ./cypress/cyfmac43455-sdio-minimal.bin brcmfmac43455-sdio.bin
-
Hooked up this board with an external uSD slot wired up for SDIO 4-bit mode as i was looking for high data rates.
On the ESP32 chip GPIO_2 and GPIO_7 have SD_DATA0 functionality.
On this board the …
-
Now I use SDIO driver to communicate the connection between Linux and esp32。The normal situation is that esp32 starts first and Linux host starts again, which can work normally. And my problem is when…
-
Just going to create an issue to gather all the items that require solving before we can propose Debian installation as a viable option:
### Major showstoppers
- [x] Linux kernel Genet ACPI bind…
-
I have been observing a seemingly random bias in the ADC readings on a Teensy 3.6 when using the SDIO interface. Switching to the SPI interface solves the issue.
Setup:
- Pin A16 connected to Anal…
-
Hi,
I'm using an NXP imx8m mini processor, and we connected the ATWILC1000 module on the SDIO interface.
I'm using the 4.14.98 kernel and when I load the driver it gives me the following output:
…
-
**Describe the bug**
Murata manufactures the 1YN module which includes both WiFi and BT modules. The module hosts an Infineon CYW43439 processor and this module can comunicate via UART (BT) and SDI…
-
Hi,
Thanks for the great stuff here.
I successfully built the image and updates the u-boot on my H96 Max M1 garbage android TV.
From what I read, I must first setup an SSH connection before being…
-
I am trying to get the RPi with onboard wifi to play nice with iwd and connman. The latest driver in the tree is a couple years old and does not like to reconnect if the radio on the router is restart…
-
we use wilc1000 in cpu NUC976(arm926t core)with linux 3.10.108. wilc module work well except for scheduling bug at https://github.com/linux4wilc/driver/issues/83 (Not yet solved).
There ar…