-
ChromeOS Device Firmware Utility Script [2024-01-07]
(c) Mr Chromebox
*********************************************************
** Device: Samsung Chromebook 4 (BLUEBIRD)
** Platform: Int…
-
## Describe the bug
### The working setup
I have an application that prints a cursor on a display and rotates this cursor based on a sensor value by using this code:
**Cursor**
[iaq_img_cu…
Kampi updated
8 months ago
-
Context: I develop for NCS/Zephyr.
AFAICT the swap_move implementation doesn't check if the sector sizes are the same and just uses the sector size of the primary partition. I had to set `CONFIG_SP…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hello!
While Tow-Boot ports to AllWinner H3/H5-based boards (such as [NanoPi M1](https://github.com/Tow-Boot/Tow-Boot/pull/257) and [Libre Computer ALL-H3-CC H5](https://github.com/Tow-Boot/Tow-Boo…
-
#100609 adds sdpa patterns to pattern matcher that are seen in models from HF suite. The status of the benchmarked models is as follows:
- [x] Albert
- [ ] AllenAILongformer broken on master
-…
-
Hello friend, I hope you are very well, I am telling you about a
problem that I have with my Lenovo 100e Chromebook 2nd Gen AMD
(TREEYA), it turns out that I want to have the Chrome OS operating
…
-
We are using STM32H753 with zephyr v2.7.2 along with MCUBoot v1.8.0 with some changes backported related to flash alignment and boot magic.
We are using IS25LP128 external 16MB flash for storing th…
-
This arose driving an EEPROM using hard SPI on Pyboard D hardware (soft SPI works OK). Baudrate was 5MHz, other args default. Hardware is a Pyboard D on a DIP28 adaptor on a small PCB with a pair of E…
-
```
λ ./linuxdeploy-x86_64.AppImage --appdir install
linuxdeploy version 1-alpha (git commit ID 4c5b9c5), GitHub actions build 57 built on 2022-01-12 09:53:03 UTC
terminate called after throwing an…
txtsd updated
9 months ago