-
This project while it was amazing at first it has become a major headache. PLEASE I need somebody to shed some light into why Im getting these issues. I tried everything I could have with my snes. I h…
-
I improved the noise adding few caps to the Silicon Labs clock generator chip and now the standalone instrument is fully working up to 1.5GHz with only a very little residual noise above 1.4GHz that i…
-
一开始用的BS170么管脚定义是反的,焊上去后12V电压直接掉到3V后来正过来装BS170后短路问题解决了,但是只有嘀嗒嘀嗒的噪音,且一直信号强度一直是-87dbm左右,接天线后依然如此,无任何改善,不知道是否有遇到同样问题的友台。
-
I built the single band wspr beacon with an arduino uno + SI5351 + Ublox neo7M + 1602A display.
According to "More WSPR magic! 20m, 200mW &12,000 miles".
Everything works fine after calibration acco…
-
I just completed this build per Voultar's guide and installed the optional Si5351. I am using a VGA to HDMI adapter, similar to his in the video.
Web GUI works great, but I have not been able to ge…
-
**Describe the bug**
I am having strange issues when using the SI5351B-GM1
**Setup**:
Microcontroller: Seedstudio Xiao ESP32-C3
Crystal: TXC 7M-27.000MEEQ-T (Per the recommended crystals)
Si535…
-
Hello there.
I have purchased GBS8200 and started modding it with the instructions of the GBS-Control. The board I purchaced seem to be [V5.2 (2022 05 28)](https://uuksu.fi/other/gbs-control/2.jpg)…
-
Please be so kind and briefly explain why did you remove - multi->add( *lowpass_fir );
I have tried parts of your previous code and it works like a charm.
By the way I do not have 8kHz issue here …
-
Title says it all really, am I missing something?
I'm not the only one with this problem, after a quick search through the issues I found #155 which, while quite long winded, is basically the same …
-
### What would you like to know?
How precisely can I set the HackRF's sample rate? To the nearest MHz? Or to the nearest Hz? Or something in between?
I'm asking because I was wondering if I coul…