-
I have a sketch that I made about a year ago with the SIM7000 and an esp32 to datalog some temperature information and upload to Adafruit IO via MQTT ove LTE, it worked fine the last time I used it. T…
-
Hello!
I have a custom PCB with PWRKEY pin instead of RST. Is it possible utilize it on init with lwGSM or I have to implement some additional code by myself?
Thank you.
-
[X] I have read the Troubleshooting section of the ReadMe
## What type of issues is this?
[(x)] Request to support a new module
[ ] Bug or problem compiling the library
[ ] Bug or issue …
-
this is my result code:
```
Docklight Log File (ASCII) - Started 4/16/2019 22:02:19.85
4/16/2019 22:02:45.61 [RX] - 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configs…
-
**Describe the problem you have/What new integration you would like**
I just saw that ESPHome added support for the Sim800L using SMS (#thanks @glmnet). Wanted to see if it would be possible to s…
-
The TCPconnected function sends `AT+CIPSTATUS`, however this is not a valid command for the FONA 3G's SIM5320. As a result, this fails every time.
In some other libraries like Adafruit_MQTT_FONA it…
-
Hi,
Is it possible that when battery voltage drops below 3.7v the SIM7000g modem cannot connect to network?
In other posts I have seen lowest voltage around 2.7v.
How do you overcome this issue? I d…
-
Hello Timothy,
We worked with your Sim7000 modules with the arduino mega, added someone of our code to interface with our servers and everything went well.
As soon as i switched the hardware to th…
-
FONA basic test
Initializing....(May take several seconds)
Configuring to 9600 baud
Attempting to open comm with ATs
---> AT
AT
AT
AT
AT
AT
AT
AT
AT
AT
AT
AT
A…
-
I have been attempting to power down the modem using the commands provided, and methods presented in various issues here, but have not had success.
my setup runs this function to start the modem:
…