-
[ X] I have read the Troubleshooting section of the ReadMe
## What type of issues is this?
[ ] Request to support a new module
[ ] Bug or problem compiling the library
[ ] Bug or issue wi…
-
I have conected sd card in (25,27,26,33) like the example. However when I try to write in SD and send data with GSM doesn't work. I'm always in this step Connecting to APN:.... and it doesn't connect…
-
for example:
cheap UART WiFi - http://www.instructables.com/id/Using-the-ESP8266-module/
-
یلام و عرض ادب . من از کتابخانه شما برای ارسال و دریافت پکتها باپروتکل mqqt استفاده کردم. اولا که احسنت بر شما و دست مریزاد .
در وهله بعد ما هنگام publish , subscibe کردن هیچ مشگلی نداریم ولی پکت …
-
This function supposes to reset USART driver state by clearing receive and transmit enums to 'IDLE', reset some counter etc. It is used in three places by sim800 GPRS/GSM modem driver. The problem mig…
-
Hi Mr. Tilen,
Did you implement any MQTT example with SSL encryption. I changed:
`res = gsm_conn_start(&client->conn, GSM_CONN_TYPE_TCP, host, port, client, mqtt_conn_cb, 0);`
with:
`res = …
-
Hi there,
I hope someone can help me!
I try to check my balance, but it doesn't work.
I've tested this example code to no avail:
`
TINY_GSM_TEST_USSD && defined TINY_GSM_MODEM_HAS_SMS
String u…
-
`AT+CFGRI=1` makes the FONA look to see if an Unsolicited Result Code (URC) should trigger the RI pin low for 120 ms. It doesn't have much to do with SMS's.
-
I would like to power a Lilygo ttgo t-call controller (esp32 + sim800) with LiPo battery (type 18650).
Under the board there is a jst-ph 2mm connector but, if I connect, the LiPo battery to this conn…
-
I am using Neoway GSM modem N10 by modifying SIM800 driver. I will be greatful if you can include N10 also in the driver. If it takes more time then at least help me for the function for receiving SMS…