-
After we've written the noise moddelling of APD, PMT and PPD, we need to write this for Multi-Pixel Photon Counters (silicon photomultiplier, SiPM). These detectors are able to measure singel photons.…
-
Hi Spencer,
First off, let me say thank you so much for putting together this wonderful project. It is very impressive and I have already learned so much (though I am still very much an electronic…
-
Hi Spencer,
Have you seen (or heard) about any issues with Arduinos failing when using pyserial? Recently, I was evaluating how to make coincidence measurements with two detectors both recording d…
-
Hi,
I'm preparing basic training exercices/homework on simple data analysis where we will eventually have CosmicWatch units assembled and generating the data to process. In the meantime I'm hoping …
-
Hi.
I have a problem with the SIPM module of the detector. I have assembled the SIPM module and apparently everything is fine:
1) The voltage between the HV and GND pins is 29.3 V.
2) The chip is i…
-
Hi, first wanna say thanks for such a beautiful and well documented project.
I follow all of your steps and exactly copy your work. I did all the troubleshooting, DC-DC booster working fine, OLED wo…
-
I'm building recently an acquisition system for roughly 4k SiPM (Silicon PhotoMultiplier) channels.
The front-end will be equipped with 70V bias LDO, temperature sensor, tiny CPU that takes care abou…
-
**问题描述**:
参考文献中列表中会包含url信息，例如对于bib中如下的文章：
```
@article{gonzalez-montoroPerformanceStudyLarge2017,
title = {Performance {{Study}} of a {{Large Monolithic LYSO PET Detector With Accurate Pho…
-
Hey Spencer,
I'll try and upload pictures in two days if I can as the project is currently in the lab, but I will explain the problem as best as I can.
Currently, the muon detector does not dete…
-
Ok weird problem here:
My arduino keeps connecting and disconnecting from my computer as I try to do anything with it, especially if the SiPM is connected via the 6-pin connector.
From what I ca…
ghost updated
5 years ago