-
Hi. I have a question. Nano-slcan.ino works on the program canhacker?
If it works then what is the probability of the reliability program?
-
_NOTE: I am [reposting my forum post](https://forum.beagleboard.org/t/l2-cache-flushing-due-to-starfive-7100-architecture/29197) here for greater visibility._
The BeagleV beta boards have the StarF…
-
Rewrite this project to a proper kernel module.
After the rewrite this project will share most of its code with the slcan utils.
The kernel module will be adjusted for the serial protocol and the …
-
**Describe the bug**
we have tryed to install sos (ubuntu-18.04) and uos(ubuntu-18.04) on a dell optiplex( i5-6500T 16GB nvme + sata), generate board and scenario xml using config tools , build acrn…
-
## Issue description
I installed NixOS on bare metal in a computer of mine this last weekend...and graphics did not work. They just stop updating after a certain point in the boot, however, the OS…
-
Add support for slcan protocol with serial device without slcand for Windows.
I reprogrammed the open hardware device [CanDybug](https://github.com/IntergatedCircuits/CanDybugFW) to support the sl…
-
The Power/Volume buttons worked perfectly with kernel version 5.9.13, but stopped working after the upgrade to 5.10.1
After updating the kernel from `5.9.13-surface` to `5.10.1-surface` via…
-
On Lucian his system:
https://vrm.victronenergy.com/installation/47448/overview
the grid meter is connected to the missing ftdi usb.
Venus OS v2.53
and there is another ftdi usb rs485 inte…
-
I've v7.10 of the USB-CAN Analyer:
1. CAN adapter : QinHeng Electronics HL-340 USB-Serial adapter
2. CAN Identifier : 1a86:7523
I compiled your code, and I'm running it to foreground
```
s…
-
The Portmaster was not able to initialize the nfqueue. This might be connected to #82 - but in that case the error later changed to not being able to initialize iptables itself.
**What happened**:
…