-
TMC2130 support for Marlin 2.0 bugsfix has been successfully compiled to run with ESP32. A native ESP32 pin needs to be used for the CS pin, for example, GPIO21 (SDA) or GPIO22 (SCL).
TMC2208 and T…
-
Hey marq,
Just an idea. I made this card using picture-elements card for my Waterkotte Heatpump (EcoTouch Geo).
My goal was to imitate the initial Screen when you are directly working on Waterpump d…
-
Hi guys
Im trying to establish communication with my danfoss link device as you've kind enough provided danfoss prod configuration in https://github.com/trifork/secure-device-grid/blob/master/demo/…
-
Hi,
great work, thanks for sharing the config!
I was able to adopt in my HA, unfortunately I don't get any values for the 'General E-Manager' Section registers 01xx.
E.g. for 0103 (Actual power c…
-
### Link
https://www.namron.com/products/namron-zigbee-termostat-16a-hvit/
### Database entry
{"id":4,"type":"Router","ieeeAddr":"0x70ac08fffe6d0475","nwkAddr":49234,"manufId":4098,"manufName…
-
### Problem description
I use skyconnect+zha.
I am able to **pair the device** using zha.permit with install code and source-ieee.
It then shows up with **4 entitys**:
(screenshot below)
…
-
# ESPAltherma Community post!
> ESPAltherma is used all over the world! well... mostly in Europe... mainly in Germany ;)
> Let's show each other what we did with ESPAltherma!
> This will be nice …
-
Hey
I have an Alde system with a 3010 control panel (3010 413 but who also has the color version 3010 613 is in the same scenario) - this is a closed system
![image](https://user-images.githubus…
-
A functional error exists -in my opinion- in the calculation of the ConstT: this factor should compensate for differences between the inside temperature and the outside temperature. Current implementa…
-
Hello, what about TGT70 Wi-Fi Series Thermostat ?
[GT70WIFI-EP Smart Wifi Thermostat](http://www.beok-controls.com/pro_view.asp?id=61)
If it uses ESP8266, can ESPURNA support it?
Best regards
Ma…