-
ik heb juist de App #SolarEdge + Growatt TCP modbus # geinstalleerd , maar er komt geen Data binnen van de Huawei inverter
![Solar ](https://github.com/biemond/solaredge.modbus/assets/149077248/7072…
-
Hi,
My Sungrow Hybrid inverter works like a charm, thanks for that! 😊 I also tested adding my string inverter and I seem to get the information about solar power production at least, my question is…
-
Hi everyone!
I'm trying to connect my On-Grid Solar PV system composed by:
Deye Grid connected PV Inverter (SUN-3K_-G03)
logger with serial number 27XXXXXXXX and Firmware version LSW3_15_FFFF_1…
-
Interface from homeassistant:
- Latitude
- Longitude
- Declination (0 = Horizontal, 90 = Vertical)
- Azimuth (360 degrees, 0 = North, 90 = East, 180 = South, 270 = West)
- Total Watt peak power o…
-
Hi @syssi,
Not sure if it was already implemented but seems there is a new variant of the protocol :
[Axpert_KSMKSV_RS232_Protocol-C20170821.pdf](https://github.com/user-attachments/files/1552113…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Current Behavior
As you see, with the same code, if I create a new card from Lovelace interface all icon…
loop2 updated
2 weeks ago
-
**Describe the problem you have/What new integration you would like**
I would like to add a component to connect an esphome device directly to my Ginlong Solis solar inverter, using the RS485 C…
-
Test compatibility with Renogy inverter models:
- [x] RIV4835CSH1S-US
- [ ] RNG-INVT-XX series
- [ ] ~R-INVT-PCL1-XX series~
The `InverterClient` is experimental and may be incomplete/ incompa…
-
Now that the OSS project is dead, it would be nice to put back in to this at least the JK CAN protocol(s) that the new bms boards support so that we could connect this wired, and then output CAN to in…
-
I'm using a Solis solar converter for a while now and I'd like to have a direct integration into openHAB.
The company offers an API - please find the description attached to this issue:
[SolisCloud …