-
I used an F-1 World Grand Prix cartridge as a donation and only kept the 4kb save chip.
However, there is no signal in the game, I have already tested all the contacts on the cartridge, there are no …
-
Soldering multiple components to the same hole is generally not recommended
Reasons include:
1.The heat from soldering can damage delicate components those with low heat tolerance.
2.The connect…
-
No matter how modern, steampunked or deviated from the recommended design :)
I'll kick things off...
Mine has a few substitutions based on what was to hand:
TL072 for the opamp
74HC4052 scavenge…
-
Am interested in seeing a pin/wiring guide to replace the esp 8266 on sonoff (basic/th) with an esp32.
I have a few projects which would benefit from hardware pwm and extra pins and being able to …
-
Hi! I'm fascinated by this project. I've been following it for a while, and now the motor is back in stock I'd love to build one of these myself.
However, I only have some basic soldering stuff, a…
-
The new Kailh MX sockets have this reinforced back solder pad, when you try to solder it in, because of the required angle to reach the socket's pad, you may end up accidentally hitting a diode's join…
-
Could this be used by soldering to a memory card socket salvaged from a GameCube instead? This way, it could presumably be used across multiple memory cards without needing to solder each.
-
I'm home sick today - didn't want to infect the team.
I hear you're asking @NateRaccoon26 to do some urgent soldering on Sunday. Can you fill me in on what needs soldering?
-
Design a tray to hold the components of a soldering station.
- [ ] [Soldering Iron Stand](https://a.co/d/dPOayz8) - Fixed to tray
- [ ] [Soldering Mat](https://a.co/d/bYyA7yC) - Removable
- [ ] …
-
Hi,
I have recently acquired two v1.29 TRRS boards from your shop with two OLEDs and through-the-hole soldering. So far, everything seems to work nicely, except:
1. one side has a key stuck (LH,…