-
# :wave: Welcome to GitHub Learning Lab's "Introduction to GitHub"
To get started, I’ll guide you through some important first steps in coding and collaborating on GitHub.
:point_down: _This arrow m…
-
I would like to be able to use the Robot Modes while transmitting in SSTV.
-
I am unable to access the webserver or view the images recorded. using a rpi 3B running raspbian lite
-
GNU Radio has its own bundle system, Python Build Overlay Managed Bundle System: https://github.com/gnuradio/pybombs - should try it out and investigate how it compares versus these Homebrew formulae.…
-
Hi!
###Issue
So I'm not a big sstv nerd and I don't know all the terminology involved, but I do know that most if not all sstv systems start their messages with a little pattern that tells the decod…
-
It seems like the experimental settings for NextjsSite were removed, but are still present in the docs: https://docs.sst.dev/constructs/NextjsSite#experimental
SSTv 2.43.3
https://discord.com/ch…
-
I am very much enjoying exploring sound-to-image with Robot36; I am also not a ham radio person, but an artist with interests in space race/cold-war era media.
I have a strange request: Would you …
-
Having probs compiling the QSSTV code taken from main branch today 2May2023.
Using QtCreator (6.0.2) installed on LinuxMint Mate v21.1 with all updates as of today.
Library qt5-default is not availa…
-
Ok so I just compiled and the firmware is crashing on the following requiring me to hit the reset switch.
Transmitters:
Signal Generator
Soundboard
TEDI/LCR AFSK
And the touch tunes remote is n…
-
1. For smaller size, you might want to consider the ESP32-Devkit module which has only 30 pins vs. 38 pins on the ESP32-WROOM. I thinks it's also a little cheaper.
This should require only a trivial …