-
Based on the module description of `modm:platform:fsmc`, my assumption would be that the module is meant to cover both FMC and FSMC. This assumption is reinforced by this [bit of code][1]:
```pytho…
mensi updated
2 years ago
-
Hi,
I have detected two errors with STEP and Render 3D.
Installed on Fedora 35 and version [4b0f7a2].
Step export enable, Log with kibot -v:
-------------------------------------------------…
-
**Describe the bug**
Compilation error when making USB support. I tried to set different UART and USB settings, in all cases I get a compilation error. I need USB to exchange data via SERIAL.
**To…
ghost updated
2 years ago
-
### Description of defect
After deep sleeping the ADC will not function as the HSI clock is no longer enabled.
We are using the following to bring the ADC back to life
```
void forceAdcOutOf…
-
I'm looking for a way to build documentation for supported functions for board's pins in a table/matrix form.
Tried searching in the generated doxygen files, but no luck (or did I miss it?) I could o…
-
**Describe the bug**
L151C8TxA does not compile if you chose any of the CDC options
![image](https://user-images.githubusercontent.com/9059644/126723804-a25e10e6-08e4-4e1b-bc0f-ddefd8d6120a.png)
Th…
-
**I found several major bugs within a few weeks, in version 2021.01:**
**1) In function spi_acquire at stm32/periph/spi.c**
uint16_t cr1_settings = ((br = 11) {
return (DMA1_Channel4_5_…
-
### Description of defect
Using the method described at https://github.com/ARMmbed/mbed-os/tree/master/targets/TARGET_STM works for mbed-os-6.9 but not for 6.10.
#### Target(s) affected …
-
FLASH_SIZE incorrectly reports flash size for cat.2 devices with DEV_ID 0x429
```
smt32lxx_hal_flash.h
#define FLASH_SIZE (uint32_t)((*((uint32_t *)FLASHSIZE_BASE)&0xFFFFU) * 1024U…
-
Following merge of #34120, #34609 (done) and https://github.com/zephyrproject-rtos/zephyr/pull/34701 (on-going), dts based clock control configuration will be made available to all STM32 based boards.…