-
I received STC-1000 WR-032 V3.
It is very different from others.
LED display (no identification ) looks the same, but only has 7 pins.
Only one 16-pin mc (no identification ) on front board ( behi…
-
```
What steps will reproduce the problem?
1. Compile versaloon nano and vsprog under ubuntu 14.04.1 lts with gcc.
2. Try to flash stm8 (swim) or stm32 (swd) mcu.
What is the expected output? What do…
-
```
What steps will reproduce the problem?
1. Compile versaloon nano and vsprog under ubuntu 14.04.1 lts with gcc.
2. Try to flash stm8 (swim) or stm32 (swd) mcu.
What is the expected output? What do…
-
The STM8 plattform has an embedded Bootloader which listens to commands in the very first seconds of the bootup-procedure. It has to be enabled by the option-bytes and is deactivated when read-protect…
-
Goodmorning,
How can import this project in a IDE? Arduino IDE/Visual Studio ecc
Thanks
Federico
-
Hi
Not having an option to reboot the pi on power restore after a power fail means you can't use it in unattended situations. Bit of an oversight if you consider where it fits into the market and wha…
-
Hi!
I got into my hands over 10 boards with STM7 (72C334). I think it might be good for some of my projects.
Generally, I'm using Arduino IDE ALOT, so it would be awesome to use it to program tho…
-
Due to missing the PF port the LUT tables (port_to_####_PGM) has wrong place for PG port. PG = 7, but its index in the table is 6.
After adding PF port, the pins on PG port are working fine:
const u…
-
As far as I can read the isa description of the STM8 in the .sinc file the two instructions ":CALLF Addr24" and ":CALLF [Addr16DW]" are defined in a very similar way. But doesn't the ":CALLF [Addr16DW…
-
- [ ] 8051
- [ ] C8051F330: Silicon Labs ToolStick
- [x] AVR
- [x] ATtiny85: Adafruit Trinket
- [x] ATtiny13A: Cheepit Sparrow
- [x] ATmega328P: on breadboard
- [x] Cortex-M
- [x] S…