-
Hi,
I'm developing a soluble support, and have a small problem.
Slic3r doesn't currently allow to have solid support -- so something printed exactly like the object, but using another extruder and sp…
-
[TEAM_CAFFE.zip](https://github.com/msudesign/Senior-Design-3D-Printing/files/1839794/TEAM_CAFFE.zip)
-
Need to draft experimental methods for implementing an epoxy Infiltration of Chamber/Floor using BJB epoxy resin (TC–1614) as described by [Stratasys](http://www.stratasys.com/solutions/finishing-proc…
-
Is it possible to add "Infill" among "Seam position" options?
I did a little search on this and it seems there is no slicer implementing such thing, is it for some reason difficult to do?
-
Dear Mr. Alessandro Ranellucci
I had to change to other slicer because in real Digital long run production we need to make multiple STL file in one plate...never been able to prepare a Multifile (6 …
-
Hey,
I have troubles with installing PyCrypto on Windows and I usually use Linux, where installing things usually works easily. But since you provided a batch file I have to use Windows now. Which …
-
there is less but still.....
it's where the perimeters start and end
it will be a good thing t…
-
I know it's so old-school to use Rafts, but sometimes you have prints or print beds that just DO NOT stick very well with ABS. (Or objects with small bases where it helps to have a nice structure to h…
-
I have the following xxd outputs:
> xxd -p id_2017-04-28_original
> 238763210100001a
> xxd -p eeprom_2017-04-28_original
> 1d3bcdd6826485d60a8fe69566fe8ad8bb8e1bf2ed123289d97286516ed3
> 80f68…
-
When I launch the MeshMixer AppImage on Fedora 25, it asks me the following question:
![meshmixerappimage1](https://cloud.githubusercontent.com/assets/2401856/21750847/58b510ac-d5bd-11e6-9b48-cbe65…