-
When on solar and the battery runs out, the board will probably shut down. When the sun returns and there is some solar power available again, there must be some way to recover. Without any special ha…
-
Tested on HW: nrf52832+sx1262 module.
DIO1 used in interrupt mode, sx1262 used with TXCO, DIO3 as voltage source, DIO2 for TX/RX switch.
Tested stack version: **v4.5.1, class C, US915 region**
Ne…
-
Hi!
I try to get the library running on an RPi 3b+ with the 64bit OS headless. The board I am using is the waveshare board with SX1262 via SPI and GPS via serial.
When I compare the version if …
-
Hi,
I'm looking for a python library for working with the SX1262 LoRa chip and I've found your library. It looks really good, but unfortunately, my product is based on the i.MX 6ULL processor and I…
-
**Describe the bug**
The current code for to get battery usage for the LoRa SX126x chip not working.
**To reproduce**
Upload the [TBeam-AXP-Example](https://github.com/ClusterDuck-Protocol/Clust…
-
Hi Matthijs,
I've incurred this issue during my tests with BasicMac on ESP32 :
```
time="2020-04-28T10:05:02Z" level=info msg="uplink: frame(s) collected" ctx_id=e401a203-720f-43e0-a8bc-909c818ca…
-
I cannot join our devices with SX1262 chips to the Helium network. The same devices joins without issues to TTN and ChirpStack. Also the same devices configured for EU868 region joins without issues t…
-
### Category
Other
### Hardware
Other
### Firmware Version
v2.5.0.ab7de7f and 2.4.x
### Description
**Device under test**
Heltect HT-CT62 but other ESP32 device seem to be aff…
-
Hi ... first of all thanks for your excellent work and making it public to the community! Just want to report, that your code also works fine on Heltec WiFi LoRa 32 V3 with SX1262 chip. Only works whe…
-
Hello, I just received Heltec wireless stick lite (v3) [https://heltec.org/project/wireless-stick-lite-v2/] module. The code is not getting uploaded on the board. I have tried different sample codes. …