-
Hello Mark.
I am interested to compile RNode firmware with [E22-400M30S](https://www.cdebyte.com/products/E22-400M30S) based on **SX1268** 433/470MHz SPI SMD LoRa Module
on generic ESP32 board
[E…
-
Hey Strange error.
This worked before but its been a few weeks and updated Radio lib atleast twice since then, the simple receive and transmitt example schetches return -2 or -706 error codes.
…
-
I am using RadioLib 5.6.0, latest Platformio, genuine Arduino Nano board (new bootloader) and a 2W SX1262 LoRa module from China.
From the debug transaction it looks like RadioLib can see the board, …
-
I am using the great RadioLib with an ESP32C3 and SX1262. All works great except the reported frequency error. I get one good report and then wildly inaccurate results. Here is an example: -224176…
-
Hello,
all spread factors work except for 11, if SF11 is selected, the message "test" is transmitted as "tP3�".
With all other spread factors (7, 8, 9, 10, 12) the communication works properly.
…
-
I'm sorry to bother you again, but I have a question. Why can't I receive messages after setting successfully? My other Lora is sending messages normally.
![image](https://user-images.githubuserconte…
-
Hi,
I am using a Waveshare SX126X LoRa Hat.
When running the files from the example folder i get these error:
"Something wrong,..." because Lora.begin() returned False.
When changing the busyPin…
-
Hello, sorry to bother you, I have a question how to connect LoRa SX1268 to STM32 (nucleo - F429ZI). Could you give me some advice on hardware connection? And what needs to be added to the firmware to…
-
Hi,
I want to LLCC68 for Atmega16, which has only 16KB space. It's too small for RadioLib.
Anyway to configure it for minimal size for specific LORA module only(LLCC68)?
Thanks;
-
HI,
Anyone get this working on LLCC68 chip? I try it with esp32 but it failed
Based on document, LLCC68 is a newer and much cheaper than SX1276/1278 and have better range.
Thanks.