-
I was looking at the dryad https://www.dryad.net/wildfiresensor sensors, and after a bit of research I got myself a bme680 and a cubecell ... I guess we had the same idea. I still didn't have the time…
abate updated
5 months ago
-
I would like to know how to configure the MISO, MOSI, SCK and SS pins for SPI in the case when I'm using the custom board?
From hal.cpp I can see that the library uses default pins:
```
static …
-
Hello there,
I am currently using a TTGO LoRa 2.16 in order to connect to the The Things Network. I replaced all the fields on the example sketch (ttn-otaa) from my TTN console. It has already been…
-
Hi,
is it possible to add support for an Inkbird ITH-20R for esp32 with cc1101 i am not sure how to add additional decoders. a link for it working with rlt_433 is , https://github.com/ehagan/rtl_4…
-
Hello, I'm new to this.
With Arduino UNO, there are TX and RX pins for me to establish UART connection.
Which pins can I use to for TX and RX? Thanks.
-
I don't know if it's only a problem with my ttgo or battery but I can see only a value of battery voltage on the battery info screen. Battery status, temperature, USB voltage are empty.
I have ttgo l…
-
#### Description
Cannot format using vfs_format on Heltec Lora v2 (esp32-heltec-lora32-v2)
#### Steps to reproduce the issue
I'm following the SPIFFs example (https://github.com/RIOT-OS/RIOT/tree…
-
I have [a driver](https://github.com/lora-rs/lora-rs/blob/a25e970225f4976a7b71d7159f7c69b5b0b70860/lora-phy/src/interface.rs#L54-L56) that does spi.transaction with sequential write and read operation…
plaes updated
3 weeks ago
-
Hey,
Im trying to figure out how and playing around with the waveshare module in combination with the raspberry pi pico, however it seems ive ran into an issue trying to run the sample code:
```
…
-
**Describe the bug**
When I run my tracker (ESP32 or T-beam), the location is not published in the Sondehub map.
**To Reproduce**
This happens to both trackers that I test, always.
**Expected …