-
I have tried using SH1106 Display on My T Beam with SX1268.
T Beam gets into boot loop and sadly does not work.
When trying to choose ssd1306 in code I can see on the display that the software i…
-
### Platform
ESP32
### Description
The Tbeam S3, Tbeam Supreme and Heltec Wireless Tracker all have Adafruit TinyUF2 support which would allow for flashing via mass storage emulation (Drag and Drop…
-
Hi,
I own a few Rev 1.1 20191212 T-Beams. The GPS works great, getting a lock with 6-9 satellites, even from inside my house. They routinely got 10-12 satellites if I set it out in my yard. I re…
-
### Category
Other
### Hardware
T-Beam
### Firmware Version
2.2.160-beta
### Description
Meshtastic will run without issue for several hours, but then crashes at some point and en…
-
I have Tbeam T22_V1.1 20210222 Ublox NEO6M
My Tbeam not send out NMEA protocal.
I did as in https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/blob/master/firmware/NMEA_Reset/README.MD
Not …
-
The display does not turn off automatically on the T-Beam Supreme, although the eco mode was enabled, no matter what timeout is configured.
-
### Category
Other
### Hardware
Heltec Wireless Tracker
### Firmware Version
2.3.4.ea61808
### Description
As [reported](https://meshtastic.discourse.group/t/question-re-configura…
-
Hello,
Just idea for the next versions.
It will be great if we can observe remaining battery level on the meshtastic device directly from the TAK screen
Depend on the position reporting settin…
-
Dear Pawel,
I have just installed you OGN-tracker to work with my Stratux on a T-BEAM and that works fine from firmware.binary coming from new Stratux eu022.
I have then compiled the firmware with …
-
With the current master changes, tried to build the example sketch in catena 4450 and catena 4612. While doing the step clear the FRAM and redo the provisioning.
Then join not happening, EV_JOINING …