-
Dear butterfly experts,
I have a floating issue when running buoyantBoussinesqSimpleFoam (prototype 'HVAC.gh') through grasshopper. Can anyone help tell how can I solve it?
Many thanks.
Mark
…
-
Hi there,
I have been running a number of DNS simulations in FDS 6.3.2 to look at ignition, vertical burning, and flame behavior (particularly flame to surface heat transfer) of 5 cm tall PMMA slabs.…
-
Hello,
I am beginning to use CoolProp (version 5.1.0) to compute thermophysical and transport properties of CO2 inside a CFD simulation. As a first test I used the example for the C++ low-level inter…
-
water_evaporation_3 is the only case in that series not meeting its tolerance. A little investigation shows that as we go from complete evaporation to remaining liquid that error increases. I modifi…
-
```
FDS Version: 6.0.1
SVN Revision Number: 17534
Compile Date: March 24, 2014
Operating System: Windows 8
Describe details of the issue below:
1.) Is it just ethylene
2.) Which C,H,O,N gets used
3.)…
-
```
SVN 3255 and SVN 3263 were run on a case involving helium
release in a box with vents (case file is attached).
Helium concentrations were significantly different at 3600 s
after release of heli…
-
```
SVN 3255 and SVN 3263 were run on a case involving helium
release in a box with vents (case file is attached).
Helium concentrations were significantly different at 3600 s
after release of heli…
-
```
See thread below.
We get drastically different results for the plume temperature/combustion
heat release for mpi_intel_linux_32 and mpi_intel_linux_64 for the Sandia
methane pool fire case.
Ran…
-
```
Application Version: 5.1.1
SVN Revision Number: 6385
Compile Date: 22 jun 2010
Operating System: normal PC
Dear all,
After the simplification tests on the particle drag we turned our a…
-
```
Please complete the following lines...
Application Version:5.5.1 Serial
SVN Revision Number: 6385
Compile Date: Tue, 22 Jun 2010
Operating System: Linux
Describe details of the issue below:
Wi…