-
Hi,
did you change anything else on the OneWire or Pin Lib between Core 1.5.1 and 1.5.6?
With v1.5.1 the address from the DS18B20 sensor is found and with v1.5.6. not. Nothing changes on any other…
-
First of all really appreciate the time and effort that you put into this core, i'm truly thankful.
All worked as expected, until I tried to select AVR128DB64(for the first time, 99% rest of the ti…
-
So I installed the library thought the IDE but when I got to compile it gives me these errors. Ive installed the Attiny85 boards files from here https://create.arduino.cc/projecthub/arjun/programming-…
-
The Arduino cryptography library (https://github.com/rweather/arduinolibs/tree/master/libraries/Crypto) says that it should work with all Arduino devices. I've used it with many different devices and …
-
Hello everyone,
in the avrdude.conf (release v7.0) the memory size and page size usersig/userrow is wrong, it should be 64B and not 32B.
The relevant parts in the datasheet (page 17) is this:
>…
-
1.6.2 is ready for release as soon as I can get a fix to the asm rx implementations working,
Two tinyAVR 2 series in half duplex mode each running this identical sketch:
```c++
void setup() {
…
-
Once the ones that used to work work again.
-
Heyo,
I've been trying to work with the ATtiny402 using an atmel ice programmer through updi interface. The MCU has a 4kb flash memory. However, reading more than 256 Bytes at a time causes the read…
-
Chip: ATTINY3226
IDE: Arduino 1.19
Lib Version: 2.6.1 (current)
Since Mouser had some of those '3226 available, I grabbed some of those fine chips.
First played around with them on V2.5.11 - w…
-
- [X] **PlatformIO Core**.
### Configuration
**Operating system**:
macOS 10.13.6
**PlatformIO Version** (`platformio --version`):
PlatformIO Core, version 6.1.3
### Description of proble…