-
-
Hi Samy,
I was just wondering if you could send me something that helps with the wiring on the combo breaker when you get a chance.
Thanks. :)
-
We have some timers spare, and I'm sure we can generate some audio.
Once a scan line (so 37.680 kHz) set the PWM to output a level between 0 and 255. Add some filtering and buffering on the output …
-
Need to check if the USB pins need to be connected to certain TM4C123 pins or if they can be connected to GPIO pins instead.
-
Need to connect Headers to the extra TM4C123 and power pins so Shields can be added on later.
-
```shell
arm-none-eabi-gcc -mthumb -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=softfp -Os -ffunction-sections -fdata-sections -MD -std=c99 -Wall -pedantic -c -O0 -g -DPART_TM4C123GH6PM -DTARGET_IS_…
nhivp updated
6 years ago
-
I couldn't get the flash driver to work for the TM4C123 (actually I'm using an LM4F120) so I resorted to making manual calls to `volatile_store`.
One problem is that the flash write buffer is in fa…
-
Error: [Sun Feb 11 22:32:56 2018] Processing lptm4c1230c3pm (platform: titiva; board: lptm4c1230c3pm; framework: libOpenCM3)
--------------------------------------------------------------------------…
-
SPI tops at 4 MHz because base speed is 8MHz.
As for the Stellaris and TM4C123 LaunchPads, I've changed
```
ROM_SSIConfigSetExpClk(SSIBASE, SysCtlClockGet(), SSI_FRF_MOTO_MODE_0, SSI_MODE_MASTER, 8…
-
DSLite version 6.2.1.1594 fails to upload to the TM4C123 / LM4F120 LaunchPad if the Kentec K35 SPI BoosterPack ins attached.
* With Kentec K35 SPI BoosterPack attached on the TM4C123 / LM4F120 Lau…