-
Hi Magnus,
I needed to reinstall HA on my Pi4 and placed `truma.yaml` separately in the `/config` folder (besides `configuration.yaml`). Before, I had your `truma.yaml` code directly inserted in `c…
-
@Fabian-Schmidt @snipah
After installing the (slightly modified) truma.yaml on my ESP32, I see a warning in the HA File editor for the `/config/esphome/esp32.yaml` file:
> unknown tag ! (145:11)
…
-
As the title says: 'truma_inetbox.timer.disable' does not disable TIMER_ROOM
-
Hi Fabian,
Is it possible placing the hotspot credentials separately? (like the Wifi SSID and PW in `/config/esphome/secrets.yaml`)
When searching for `secrets.yaml`, I stumbled over this:
http…
-
Hi Magnus,
I hope my message finds you well.
My spare ESP32 now runs `flash_esp32_inetbox2mqtt_v210_4M.bin`. It is connected to my Wifi at home, and I can see its IP on my Fritzbox. However, I c…
-
Hey Fabian!
I guess that you are using Home Assistant for your implementation if the Truma Inetbox.
Could you possibly share your config for Home Assistant as some kind of blue print? I'm asking…
-
Hi Fabian and other users!
Do you use a DS1307 RTC attached to a Raspberry Pi and could share some details about wiring and setting it up? Thanks for your time and help!
-
Hi Fabian!
I'm using Magnus' inetbox2mqtt on an ESP32 with UART-LIN adapter and CP+ and can thus control my Truma Combi 4. Now I kind of stumbled over your project (Magnus starred it here on GitHub…
-
Hi Magnus!
What is the operating_status about? E.g. "start/cool down"? I see this in MQTT but don't know its meaning. I have not powered the gas on and therefore am puzzled a bit about the term "cool…
-
Hello, I just found this repository.
Is it functional (I mean, the communication protocol)?
Would it work with a diesel heater (you only mention gas in the source)?
Which hardware interface are you…