-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
After upgrade to 8.3.1 the external switch/button (GPIO4) is no longer detected on a Sonoff Mini.
(I also…
-
Successfully flashed (only) one Gosund SP1 (out of a box of 4 SP1s).
The other 3 from that box, flashing doesn't start (only the dots are counting up forever).
Device used for flashing:
- Raspber…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
One Tasmota unit does not attempt to use the NTP server listed in the DHCP option. Manually setting NTP server …
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
All attempts I have made to switch a Tasmotarised device from one AP point to another is failing. Try as I may…
-
There have been release of new ifan03. It is an improved version from ifan02. Do some of you guys have it? Will there be support in tasmota?
ghost updated
2 years ago
-
**Describe the problem you have/What new integration you would like**
Sonoff has released a new device called the D1 which is a mains dimmer using a ESP8285. With the help of others, we have b…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Blind position jumps to zero when a tilt command is issued while the blind is moving.
### REQUESTED INFORM…
-
So all my sockets were working fine until today they starated one by one being "unavailable"
I have done repairing again with my MQTT as per documenation:
`sudo ./meross-setup --gateway 10.10.10.1…
-
I'm trying to flash my new Feit bulb with the included version of Tasmota and it is failing. I'm not getting PSK errors so I'm not sure it's the patched firmware causing trouble. My phone connected on…
-
## Information about the device + link
https://www.aliexpress.com/item/1005002420495341.html?spm=a2g0s.9042311.0.0.248d4c4dEHPA1V
## data/database.db entry of the device
{"id":5,"type":"EndDevice…