-
On the Pico-Ice, I can install a soft core on Linux, and talk to it with the following command:
sudo picocom --baud 115200 --imap crcrlf,lfcrlf /dev/ttyACM1
When I then try to talk to it on …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
The cmakefiles refer to a file named `class/cdc/usbh_cdc_ecm.c`
https://github.com/bouffalolab/bouffalo_sdk/blob/0f07c3b8ecbed6b5eda90cc794611c6dd9077851/components/usb/cherryusb/CMakeLists.txt#L59…
-
### Describe the bug
When downloading OpenWRT, with the m2 keyB module connected, the modem module is not detected over the usb interface bus, the firmware simply does not see it, I tried to downlo…
-
**Describe the bug**
The system is rebooting once a parade-usb hub is attached and detached with this error:
```
FuDeviceList ::added cf294bf55b333004beb7c41f952c1838c23e1f4a [USB2.0 Hub]
…
-
Recently I got USB supported MMDVM_HS_Hat from AliExpress, and it is programmed USB-CDC capable firmware.
I build recent MMDVM_HS firmware and installed, OpenBSD (I don't know about other OSes) canno…
-
blisp throws a "device not found" error while trying to flash a Pinecil V2. On the Pinecil docs, it's stated that the device will appear as a `/dev/ttyACM*` device, but this does not occur on my machi…
-
### Board
esp32s3
### Device Description
esp32s3 devkitc n8r8
### Hardware Configuration
Native USB port plugged into computer, serial convert USB port not plugged in.
### Version
…
prplz updated
2 months ago
-
### Description
One feature that the STM32F1 library has is the ability to have direct access to the SD card as a mass storage device in addition to serial commands over USB. Currently the HAL does…
-
Before I waste my time issuing a PR: is there any interest in an CDC-NCM driver for Zephyr? As far as I understand #42066 it should be.
Some time ago I made a bigger rewrite of the NCM driver for …
rgrr updated
5 months ago