-
Not really an issue, just something I noticed when using a USB Numpad though HID-Remap.
If Numlock is ON on my main keyboard, the USB numpad's Numlock can be flipped ON/OFF separately, basically gi…
-
Device type: Fan Controller, RGB Controller, Temp Sensor, Flow Sensor
Product page:
[OCTO](https://shop.aquacomputer.de/product_info.php?products_id=3832)
[Quadro](https://shop.aquacomput…
-
Device type: Pump with and Integrated Controller, one Extra PWM Header and one RGB Header
Product page:
[D5 NEXT](https://shop.aquacomputer.de/product_info.php?products_id=3785)
First-part…
-
Possibly
- ~~A process on RaspPi monitoring the GPIOs and generating the corresponding CSV file~~
- The STM32 starts saving the input signals in a custom structure when receiving a USART command
…
-
The design currently has a single routing of USB 2.0 pairs. This can cause some adapters with alternate modes to fail to operate properly. Captive plug alternate modes can remap the alternate USB pa…
-
Hey
I try to build a small monitoring for a DMX-line, before creating a controller. Therefore a ODROID-GO would be a nice device with an DMX-USB cable at its input. I try to use the library
#include…
-
### Bug description
There are four MacOS users that have reported an inability to Monitor Overdub recording all during the past 10 days. It is not yet clear if the issue lies with Audacity 3.2.x o…
-
### Operating System
Linux
### Board
Custom board with STM32H730 and USB3343
### Firmware
tinyusb 111515a
FW based on custom RTOS, no caches
should not be relevant for this case
tu…
-
I use kali 2020.4 and Asus usb-ac56 adapter.
I have already tried all branches of drivers, only 5.7.0 work normally in monitoring mode. The only bug, the airdump does not display the power of the acc…
-
It would be good to have reset reason information available to SensESP UI or/and stream to Signal K.
Currently reset can be detected by monitoring USB debug stream or uptime data. If USB is not conne…