-
-
It would be nice to be able to use the USB media plugged in to the Prusa Mini as an SD card for use with Octoprint. If nothing else, it seems like it might alleviate issues with https://github.com/pr…
-
### The problem
After a forced shutdown caused by a power blackout, my Home Assistant installation no longer detects the Bluetooth dongle I'm using (ASUS_USB-BT500). The device appears in the hardwar…
-
Copied from #197 ([comment](https://github.com/Serial-Studio/Serial-Studio/issues/197#issuecomment-2271045134)):
> I am receiving a spurious empty newline ~5% of the time that I do not experience i…
-
Add option to monitor the device and re-connect if device re-appears
This is to help with USB serial ports that disappear if the device is without power
phako updated
7 years ago
-
I've got an ESP32-S3 + TinyUSB project that creates two CDC serial devices. On macOS and Linux these always enumerate in a consistent order, and thus I'm able to sort them trivially (e.g. on macOS `/d…
-
Hi KellerZA,
Been using your Sunsynk/Deye Inverter Add-on (multi) latest version 0.6.5 for a while now.
I have the Sunsynk 8Kw inverter connected with the Wave USB to RS485.
All sensors and every…
-
Hi the code can support in usb serial port is esp32 s3?
Thank you
-
Howdy folks, hoping someone can point me in the right direction re: USB core IDs.
I spent the morning fiddling with the [STM32H7 usb_serial example](https://github.com/embassy-rs/embassy/blob/main/…
-
Catching error on running `make` on Raspbian kernel 6.1.0-rpi4-rpi-v7, still, when trying to make in the 5.4.0-88-generic Kernel, all goes fine...
## Output
```
make -C /lib/modules/6.1.0-rpi4-…