-
Hi @malcolmmackay, your project seems very interesting to me and I wanted to ask if we can use any generic USB to UART bridge (FT232R/CH340/CP2104/PL2303) for programming the MSP430 with your programm…
-
Hi,
This is just to notify that i'm working on adding support for this dev kit : https://www.efinixinc.com/products-devkits-titaniumti375c529.html
Let's me know if you have done any related work…
-
I am trying to make a dump of a RTL8710BX from the Govee Lynx Dream String Lights (H7021) to make a backup before putting esphome on the chip. I am able to get into boot mode but end up getting stuck …
-
Any thought to bringing out UART (maybe from an FTDI?) or USB hub to allow for external USB connections as well? I imagine this could be a very handy micro computer to carry around to be able to flash…
-
**Is your enhancement proposal related to a problem? Please describe.**
AFAIK, there is no API to know the wakeup source.
**Describe the solution you'd like**
hwinfo seems to be the right place a…
-
Hi!
First of all I would like to congratulate and thank you for your help in the development of the "USB_Host_Shield_2.0" library for arduino. It was an impeccable job that inspired me to develop a s…
-
Hello!
I was wondering if this core can be used out of the box as USB-UART bridge. Do you think it's possible to generate a DTR and a RTS signals? Essencially I want to use the ECP5 to act like a USB…
-
Hallo there,
I'll expect the clock div for the `clock_peri` not to be working correctly.
Test case 1:
clock_sys = src
-
I might be misunderstanding something (or doing something wrong) as I am quite new to the esp-rs community, so sorry for that in advance. I currently have some [WEMOS lolin 32 s2 mini](https://www.wem…
-
# ESP32-P4 support status in ESP-IDF
ESP-IDF v5.3, currently in development, will include initial support for the mass production version of the ESP32-P4 chip.
In the list below, supported featu…