-
Dear @mrlnc,
My current setup uses USRP B-205 mini connected to a 2.4/5.8 GHz antenna for the RX2 to decode DJI Mavic 2 which uses Ocusync 2.0 protocol. I tried running the code both in indoor and …
-
Hi, I have two USRP devices, N2920 and B210. I test loopback mode on N2920 with USRP Echotimer and things seem to be running smoothly. I can see the frequency and time plot correctly. But when I run t…
-
Installed all the perquisite packages, but it's unhappy trying to link against librtlsdr. Not sure why, it's there, `ldconfig` knows about it. This is on an RPi 4 with the latest Raspberry Pi OS. Any …
-
I received following error on compilation
In file included from /home/pi/uhd/host/lib/usrp/OpenUSRP/limesdr_impl.hpp:24:0,
from /home/pi/uhd/host/lib/usrp/OpenUSRP/limesdr_impl.cp…
-
## Issue Description ##
Occasionally, and non-deterministically, I see the following warning:
> [WARNING] [RFNOC::GRAPH] One or more blocks timed out during flush!
The weird part is t…
-
Body: Greetings : ),
After invoking the llamafactory fine-tuned qwen2-7B model using ollama.chat(), the model is unable to recognize the system prompt.
The model sometimes fails to generate any re…
-
Gnss-sdr always threw some error after ran on USRP B210 for a while, like:
...
Position at 2020-Oct-11 09:08:09.000000 UTC using 7 observations is Lat = 31.264074809 [deg], Long = 121.623262225 […
-
## Issue Description ##
srsUE failed to attach with following error
Waiting PHY to initialize ... done!
Attaching UE...
[ERROR] [UHD RF] RuntimeError: Multiple sampling rates upstream of RX …
-
Your guide is currently not for USRP?
-DUSE_BLADERF=1 -- build for BladeRF
-DUSE_HACKRF=1 -- build for HackRF
-DUSE_OPENCL=0 -- disable OpenCL (See notes in later chapter)
-
Dears, is it possible for receive dvbs2 from usrp b210?
best regards
Deligeer