-
Reference: http://forum.6502.org/viewtopic.php?f=4&t=2543&start=30
I seem to get garbage on the output using WDC65C51. It works using an UM6551 (although it sometime hangs).
thanks in advance.…
-
Today I was experimenting with HMMC, with the R#25 CMD bit set to 1, and openMSX didn’t behave as my turboR did:
* In TEXT2 mode:
10 SCREEN 0 : WIDTH 80 : PRINT : I = 65
20 VDP(26…
grauw updated
7 years ago
-
**Reported by manuelbi on 2002-06-03 08:51 UTC**
Support for the V9958 and thus also MSX2+.
-
**Reported by sd-snatcher on 2012-09-25 00:56 UTC**
There are some errors on the " VDP register view" window:
\- Under the "Decoding V9958 registers" box, the CPU waitstate status is inverted.
- The …
-
**Reported by manuelbi on 2002-06-03 08:51 UTC**
Emulation of MSX TurboR hardware.
-
**Reported by manuelbi on 2003-06-07 20:07 UTC**
This little demo shows an animation (with COPY
commands) with a small scroller under it. The scroller
is completely garbled and the animation is only h…
-
**Reported by sd-snatcher on 2010-02-03 02:25 UTC**
Please add support for the machine "CIEL Expert Turbo". This one is a full motherboard by CIEL (not an upgrade kit), created to replace the motherb…