-
Reported on community:
![image](https://github.com/victronenergy/gui-v2/assets/38864570/93a329d7-32ff-4b6f-8f45-58d6dc27575c)
I reproduced this:
After configuring a relay as "Temperature", the…
-
After I installed guimods, I'm noticing that my CCGX is occasionally rebooting on its own. This usually happens whenever I try to switch back and forth from the Flow panel to the settings page. Someti…
-
Seen at 'Training Centre RO', wasm build.
![Screenshot from 2024-06-18 14-50-36](https://github.com/victronenergy/gui-v2/assets/6416318/a2c44278-6415-4507-8caa-ddaaaacab8c2)
The overview page show…
-
After updating my the victron integration, I noticed it stops updating/giving current values after a while and only starts giving the current values after reloading the integration.
-
For debugging, it's always convenient to have recognizable client IDs. The default is `'mqttjs_' + Math.random().toString(16).substr(2, 8)`. This is generic, and the randomness is bad. If 'random()` i…
-
### Describe the bug
does not connect to venusOS
### How to reproduce
LOGGING = INFO
### Expected behavior
LOGGING = DEBUG
### Driver version
1.3.20240527dev
### Venus OS device type
Raspberr…
-
- VSCode Version: 1.39.2 (system setup)
- Local OS Version: Windows 10.0 Pro x64
- Remote OS Version: Yocto OS (includes **wget** and **which** via BusyBox)
- Remote Extension/Connection Type: SSH
…
-
Hi,
I have 9 JK-BMSes, would it be possible with your code to give each ESP a different CAN bus address and connected them all to 1 Victron Cerbo GX (RPI with VenusOS running)
-
The automatically selected BMS is not displayed in GUI-v2, while it is displayed correctly in GUI-v1. Tested 3.40~21 GUI-v2. Reported on venus-tests.
![image](https://github.com/victronenergy/gui-…
-
Maybe it is a Problem because i use a Quattro (just inverting) and a MultiRS (just charge) on the same Cerbo...
VenusOS is 3.00
GuidMods is 7.63
![Bildschirmfoto_2023-06-14_11-02-11](https://g…